The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.
Fan Dimensions: 80 x 80 x 25 mm
Fan Speed: 3000 RPM
Air Flow: 23.4 CFM / 40.3 m3/h
Noise Level: 0.3 Sone
Typical Voltage: 12V DC
Cable Length: 400mm
Connector: 4 Pin
The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.
Fan Dimensions: 92 x 92 x 25 mm
Fan Speed: 1800 RPM
Air Flow: 43 CFM / 73.1 m?/h (@ 1,800 RPM)
Noise Level: 0.4 Sone (@ 1,800 RPM)
Typical Voltage: 12V DC
Start-up Voltage: 8.5V DC
Cable Length: 400mm
Sub PST Cable Length: 50mm
Connector: 4 Pin
Fan ARCTIC BioniX F120 Grey 120mm
We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years.
Fan ARCTIC BioniX F120 Red 120mm
We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years.
Fan Controller ARCTIC Case Fan PWM Hub 1 to 10 Port
The case fan hub can be placed freely in the housing. It is connected to your motherboard with just one cable. This means you can do without many additional cables and lay them freely in the invisible part of the housing. Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub. The RPM of the first fan slot are read out and returned to your system. Even if you don\'t have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. The fans are powered directly from your power supply via Sata Power. As a result, there is no voltage loss at the fan speed and smooth, smooth operation is made possible.
Fan Controller ARCTIC A-RGB Controller
The ARCTIC A-RGB Hub allows you to use 3-pin A-RGB products with analog 4-pin RGB. The signal is converted and digitally transmitted. Due to the RF Remote support you can adjust your lighting with the included remote control even without direct access to or into the case. The A-RGB controller also works independently and allows you to control ARCTIC A-RGB products without a motherboard. All connected products are synchronised depending on light mode and color.
