Processor: Realtek RTD1296
Internal memory: 1 GB DDR4
IP Camera Licenses: 16 (includes 2 free licenses)
Number of hard drives: 4 x 3.5 "SATA HDD / 2.5" SATA HDD / 2.5 "SATA SSD
Max. HDD capacity: 64TB
RAID operations: Basic, JBOD, RAID 0, RAID 1, RAID 5, RAID 6, RAID 10
Ports: 2 x USB3.0 1 x RJ-45
Network: 1 x 10/100/1000 Mbps (RJ-45)
Dimensions (W x D x H): 166 x 199 x 223
Hard Drives Included: No.
Media server support: DLNA compatibility
Networking protocols: SMB1 (CIFS), SMB2, SMB3, NFSv3, NFSv4, NFSv4.1, NFS Kerberized sessions, iSCSI, HTTP, HTTPs, FTP, SNMP, LDAP, CalDAV
Cooling: 2 x 80mm fan
Power supply: 90W adapter 100-240V

Memory: 2GB DDR4 with the ability to upgrade to 6GB DDR4
Number of discs: 2 (not included)
Compatible disks:
3.5 "SATA HDD
2.5 "SATA HDD (with optional 2.5" Disk Holder)
2.5 "SATA SSD (with optional 2.5" Disk Holder)
File systems:
Internal devices: Btrfs, EXT4
External devices: Btrfs, EXT4, EXT3, FAT, NTFS, HFS +
Fan: 1 x 92 mm
Noise: 19.3 dB (A)
Supported browsers:
Chrome
Firefox
Edge
Internet Explorer 10 onwards
Safari 10 onwards
Safari (iOS 10 onwards)
Chrome (Android 6.0 onwards)

Memory: 512 MB DDR4
Number of discs: 2 (not included)
Compatible disks:
3.5 "SATA HDD
2.5 "SATA HDD (with optional 2.5" Disk Holder)
2.5 "SATA SSD (with optional 2.5" Disk Holder)
File systems:
Internal devices: EXT4
External devices: EXT4, EXT3, FAT, NTFS, HFS +
Fan: 1 x 92 mm
Noise: 18.2 dB (A)
Supported browsers:
Chrome
Firefox
Edge
Internet Explorer 10 onwards
Safari 10 onwards
Safari (iOS 10 onwards)
Chrome (Android 6.0 onwards)

Controller Kolink Inspire L1 3-Pin 5V ARGB

The Kolink Inspire L1 ARGB Controller allows you to control multiple ARGB devices, with multiple connectors to suit most addressable RGB products. The L1 ARGB Controller is SATA powered, and has connectors for 5V 3-Pin ARGB devices, alongside Phanteks DRGB and Corsair ARGB connectors too. Over 300 colour settings and modes are possible using the supplied RF remote. Brightness can be adjusted, and settings can be saved for future use.

With support for a combined 120 LED\'s worth of ARGB devices, the Kolink Inspire L1 ARGB is an excellent low cost solution to your addressable RGB control needs.

Fan Controller ARCTIC Case Fan PWM Hub 1 to 10 Port

The case fan hub can be placed freely in the housing. It is connected to your motherboard with just one cable. This means you can do without many additional cables and lay them freely in the invisible part of the housing. Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub. The RPM of the first fan slot are read out and returned to your system. Even if you don\'t have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. The fans are powered directly from your power supply via Sata Power. As a result, there is no voltage loss at the fan speed and smooth, smooth operation is made possible.