COMPUTER COMPONENTS

Fan Controller ARCTIC A-RGB Controller

With digitally addressable RGB-LEDs you can now create significantly more complex lighting effects, as every LED can be controlled individually and independently. In combination with compatible motherboards and software like ASUS Aura Sync or MSI Light Sync, the lighting of a whole setup can be configured down to the last detail with a few clicks. Mode Switch allows you to switch between manual mode and control via compatible motherboards.

Should the controller be operated independently, up to seven Phanteks Digital RGB products can be driven in a daisy chain configuration. If paired with a compatible motherboard, its maximum number of connections can be increased to up to nine RGB components in series.

Easily add digital fan and lighting control to any build which can be monitored and updated via NZXT CAM.

• Two NZXT RGB lighting channels, up to 40 individually addressable LEDs per channel, 80 LEDs total
• Lighting channels now support up to six* addressable RGB LED Strips or five Aer RGB Fans
• Three fan channels* with max 10W per channel output
• Mix and match any NZXT RGB LED accessories* while syncing all lighting accessories across different channels.
• The NZXT CAM application monitors and controls the build with presets or custom controls

Controller Kolink Inspire L1 3-Pin 5V ARGB

The Kolink Inspire L1 ARGB Controller allows you to control multiple ARGB devices, with multiple connectors to suit most addressable RGB products. The L1 ARGB Controller is SATA powered, and has connectors for 5V 3-Pin ARGB devices, alongside Phanteks DRGB and Corsair ARGB connectors too. Over 300 colour settings and modes are possible using the supplied RF remote. Brightness can be adjusted, and settings can be saved for future use.

With support for a combined 120 LED\'s worth of ARGB devices, the Kolink Inspire L1 ARGB is an excellent low cost solution to your addressable RGB control needs.

Fan Controller Phanteks Universal PWM

The already extensive catalogue of accessories offered by renowned case manufacturer PHANTEKS has expanded once again in the form of this PWM fan hub that can be installed on the back of the motherboard tray. The function of the PWM fan hubs is as unique as it is ingenious: this allows users to control up to eight 3-pin fans like PWM out of the box when paired with a compatible motherboard. To do so, simply connect the bundled 4-pin PWM cable with the motherboard connector and hook up the SATA power cable to the PSU. Now up to three 3-pin- and five 4-pin fans can be connected directly to the hub.

Fan Controller Jonsbo RC01 ARGB - SATA

Inexpensive RGB controller for addressable RGB LEDs. The RC01 from Jonsbo is connected to the power supply unit via SATA and then provides a 3-pin RGB connector. RGB components such as fans, coolers, LED strips and much more can be connected to these. 

Up to 100 addressable RGB LEDs can be controlled via a button on the controller or a housing button. Here are 16 lighting modes are available.

• RGB controller for digitally addressable RGB LEDs
• up to 100 LEDs
• Control via integrated push button or external button