Home

Fully automatic espresso machines Philips 1200 series EP1223/00

Easier preparation of 2 delicious coffees from fresh beans Enjoy the incredible taste and aroma of coffee from fresh beans, at the perfect temperature, thanks to the intelligent brewing system. The classic milk frother allows you to create a velvety smooth cappuccino or latte macchiato with ease.

Enjoy the delicious taste and aroma of coffee from fresh beans, at the perfect temperature, thanks to intelligent brewing system. The classic milk frother allows you to create a silky smooth cappuccino or latte macchiato with ease.

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Fan Dimensions: 80 x 80 x 25 mm
Fan Speed: 3000 RPM
Air Flow: 23.4 CFM / 40.3 m3/h
Noise Level: 0.3 Sone
Typical Voltage: 12V DC
Cable Length: 400mm
Connector: 4 Pin

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Fan Dimensions: 92 x 92 x 25 mm
Fan Speed: 1800 RPM
Air Flow: 43 CFM / 73.1 m?/h (@ 1,800 RPM)
Noise Level: 0.4 Sone (@ 1,800 RPM)
Typical Voltage: 12V DC
Start-up Voltage: 8.5V DC
Cable Length: 400mm
Sub PST Cable Length: 50mm
Connector: 4 Pin

Fan ARCTIC BioniX F120 Grey 120mm

We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years.

Fan ARCTIC BioniX F120 Red 120mm

We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years.

Controller Kolink Inspire L1 3-Pin 5V ARGB

The Kolink Inspire L1 ARGB Controller allows you to control multiple ARGB devices, with multiple connectors to suit most addressable RGB products. The L1 ARGB Controller is SATA powered, and has connectors for 5V 3-Pin ARGB devices, alongside Phanteks DRGB and Corsair ARGB connectors too. Over 300 colour settings and modes are possible using the supplied RF remote. Brightness can be adjusted, and settings can be saved for future use.

With support for a combined 120 LED\'s worth of ARGB devices, the Kolink Inspire L1 ARGB is an excellent low cost solution to your addressable RGB control needs.

Fan Controller ARCTIC Case Fan PWM Hub 1 to 10 Port

The case fan hub can be placed freely in the housing. It is connected to your motherboard with just one cable. This means you can do without many additional cables and lay them freely in the invisible part of the housing. Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub. The RPM of the first fan slot are read out and returned to your system. Even if you don\'t have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. The fans are powered directly from your power supply via Sata Power. As a result, there is no voltage loss at the fan speed and smooth, smooth operation is made possible.