Home

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Fan Dimensions: 80 x 80 x 25 mm
Fan Speed: 3000 RPM
Air Flow: 23.4 CFM / 40.3 m3/h
Noise Level: 0.3 Sone
Typical Voltage: 12V DC
Cable Length: 400mm
Connector: 4 Pin

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Fan Dimensions: 92 x 92 x 25 mm
Fan Speed: 1800 RPM
Air Flow: 43 CFM / 73.1 m?/h (@ 1,800 RPM)
Noise Level: 0.4 Sone (@ 1,800 RPM)
Typical Voltage: 12V DC
Start-up Voltage: 8.5V DC
Cable Length: 400mm
Sub PST Cable Length: 50mm
Connector: 4 Pin

Fan ARCTIC BioniX F120 Grey 120mm

We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years.

Fan ARCTIC BioniX F120 Red 120mm

We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years.

Gaming desk Nitro Concepts D16M Carbpn Black

Huge 160x80cm gaming desk with rugged materials, plastic coating
Table legs made of high-quality, powder-coated steel
Table top made of robust MDF with Carbon Fibre effect
Mat with micro-woven fabric surface for all mouse types
Height adjustable from 72.5 to 82.5 cm, adjustable foot caps
Capable of withstanding loads of up to 80 kilograms
Three desktop inlets for cable management
Space for up to three monitors
Headsets holder
Bundled mounting material and tools

Gaming desk Nitro Concepts D12 Black/Red

Durable and aesthetically pleasing gaming table from Nitro Concepts
Sturdy, durable steel construction and table top made from MDF
Optimized design with plenty of space for hardware and legroom
Ergonomic shapoe for high comfort
Headset and drink holders
Special synthetic coating on the table top, suitable for all mouse types
Excellent cable management with two built in grommets

Controller Kolink Inspire L1 3-Pin 5V ARGB

The Kolink Inspire L1 ARGB Controller allows you to control multiple ARGB devices, with multiple connectors to suit most addressable RGB products. The L1 ARGB Controller is SATA powered, and has connectors for 5V 3-Pin ARGB devices, alongside Phanteks DRGB and Corsair ARGB connectors too. Over 300 colour settings and modes are possible using the supplied RF remote. Brightness can be adjusted, and settings can be saved for future use.

With support for a combined 120 LED\'s worth of ARGB devices, the Kolink Inspire L1 ARGB is an excellent low cost solution to your addressable RGB control needs.

Fan Controller ARCTIC Case Fan PWM Hub 1 to 10 Port

The case fan hub can be placed freely in the housing. It is connected to your motherboard with just one cable. This means you can do without many additional cables and lay them freely in the invisible part of the housing. Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub. The RPM of the first fan slot are read out and returned to your system. Even if you don\'t have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. The fans are powered directly from your power supply via Sata Power. As a result, there is no voltage loss at the fan speed and smooth, smooth operation is made possible.