Home

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Fan Dimensions: 80 x 80 x 25 mm
Fan Speed: 3000 RPM
Air Flow: 23.4 CFM / 40.3 m3/h
Noise Level: 0.3 Sone
Typical Voltage: 12V DC
Cable Length: 400mm
Connector: 4 Pin

The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.

Fan Dimensions: 92 x 92 x 25 mm
Fan Speed: 1800 RPM
Air Flow: 43 CFM / 73.1 m?/h (@ 1,800 RPM)
Noise Level: 0.4 Sone (@ 1,800 RPM)
Typical Voltage: 12V DC
Start-up Voltage: 8.5V DC
Cable Length: 400mm
Sub PST Cable Length: 50mm
Connector: 4 Pin

Fan ARCTIC BioniX F120 Grey 120mm

We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years.

Fan ARCTIC BioniX F120 Red 120mm

We further optimised the fan blade design to get a higher airflow at lower noise generation. This guarantees high pressure and highly efficient ventilation for your gaming case.10 °C lower motor temperature doubles the life span. The BioniX gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years.

Fan Controller ARCTIC A-RGB Controller

With digitally addressable RGB-LEDs you can now create significantly more complex lighting effects, as every LED can be controlled individually and independently. In combination with compatible motherboards and software like ASUS Aura Sync or MSI Light Sync, the lighting of a whole setup can be configured down to the last detail with a few clicks. Mode Switch allows you to switch between manual mode and control via compatible motherboards.

Should the controller be operated independently, up to seven Phanteks Digital RGB products can be driven in a daisy chain configuration. If paired with a compatible motherboard, its maximum number of connections can be increased to up to nine RGB components in series.

Pyramid International - Star Wars - Rebels Pin Badge Pack

Controller Kolink Inspire L1 3-Pin 5V ARGB

The Kolink Inspire L1 ARGB Controller allows you to control multiple ARGB devices, with multiple connectors to suit most addressable RGB products. The L1 ARGB Controller is SATA powered, and has connectors for 5V 3-Pin ARGB devices, alongside Phanteks DRGB and Corsair ARGB connectors too. Over 300 colour settings and modes are possible using the supplied RF remote. Brightness can be adjusted, and settings can be saved for future use.

With support for a combined 120 LED\'s worth of ARGB devices, the Kolink Inspire L1 ARGB is an excellent low cost solution to your addressable RGB control needs.

Fan Controller Phanteks Universal PWM

The already extensive catalogue of accessories offered by renowned case manufacturer PHANTEKS has expanded once again in the form of this PWM fan hub that can be installed on the back of the motherboard tray. The function of the PWM fan hubs is as unique as it is ingenious: this allows users to control up to eight 3-pin fans like PWM out of the box when paired with a compatible motherboard. To do so, simply connect the bundled 4-pin PWM cable with the motherboard connector and hook up the SATA power cable to the PSU. Now up to three 3-pin- and five 4-pin fans can be connected directly to the hub.

Fan Controller ARCTIC Case Fan PWM Hub 1 to 10 Port

The case fan hub can be placed freely in the housing. It is connected to your motherboard with just one cable. This means you can do without many additional cables and lay them freely in the invisible part of the housing. Your set PWM signal is passed on synchronously to all fans connected to the Case Fan Hub. The RPM of the first fan slot are read out and returned to your system. Even if you don\'t have enough fan headers on your mainboard, the case fan hub expands your system by 9 more case fan slots. The fans are powered directly from your power supply via Sata Power. As a result, there is no voltage loss at the fan speed and smooth, smooth operation is made possible.

Pyramid International - Star Wars - Episode VII Resistance Pin Badge Pack